Engine of the Week is presented by Related Articles - 731 cid Outlaw 4.840 Bore Space Nitrous Engine - 632 cid Big Block Chevy Nitrous Engine - 448 cid Billet LS Engine
At just 5 years old, Nick Chauffe could usually be found alongside his dad, helping out in his father’s auto shop. Those early lessons and car experience as a young kid, led Nick to pursue automotive as both a job and a hobby. At just 14, he started rebuilding his dad’s ’66 C10 entirely on his own. V8 Exhaust Manifold
“I did all the work myself and paid for everything to redo it, including rebuilding the engine, which was a 292 Straight Six that I also installed,” Chauffe says. “That was the first vehicle I drove.”
With an interest in engine and vehicle work, Nick soon found a job working at an LS performance shop. He spent nearly six years there and became the shop’s lead mechanic/engine builder, and eventually the shop foreman.
“I read a lot of info and had the luxury of having some experienced local guys to ask questions when I needed,” Chauffe says. “Since then, I’ve probably built about 100+ LS engines, most of them from the bare block on up.”
Having spent a few years in an engine shop, Nick’s next move was to take a full-time job working in the oilfield. However, his engine building didn’t stop – it just became a side gig. Nick, and his good friend Steven Garcia, opened C&G American Muscle Cars in 2015, which operates out of Nick’s 20’x30’ shop in Breaux Bridge, LA.
The shop focuses solely on LS engine builds and installations, because that’s what Nick and Steven know best, and they have full autonomy as to what projects they take on.
“We started C&G American Muscle Cars because we were getting contacted by previous customers who knew we were into highly detailed LS builds, and it became a second full-time job,” Chauffe says. “With it being a side job, it allows us to pick and choose what we want to build and who we want to build for, which makes it really nice. The people we build these projects for are really great guys who appreciate attention to detail and are looking for something more than just a run-of-the-mill LS swap.”
C&G does high-end muscle car LS installs that get custom touches, are high horsepower and feature quality components. The cars themselves are already show cars, in many cases, and C&G takes them to the next level. The only thing C&G doesn’t do is the machine work.
“We either use local machine shops and do the assembly or we buy the short blocks assembled by Don Hardy Race Engines,” he says. “Don Hardy does top-notch work, so now we mainly use his short blocks that we custom spec. I assemble the rest of the engine, check pushrod lengths, install head studs, cam, lifters, etc. I find it to be a faster process and makes it more consistent when a top-notch machine shop like Don Hardy does this all day, every day.”
Aside from any engine work and installation, C&G will also help customers install aftermarket AC systems like Vintage Air, do complete wiring installs, aftermarket brakes, custom paint work on installed components, custom fuel systems, gauges, and other upgrades associated with an LS install.
One such example of a project Nick and Steven recently finished was for a customer/friend named David Hollis who has a Pro Street ’66 Chevelle. The car previously had a Roots-blown 383 small block in it, and Hollis wanted an LS engine with some flare. C&G delivered a Whipple Supercharged 427 LS engine!
“He was ready to make the jump to an LS and had already had in mind that he wanted to use a Whipple 510AX 8.3L on it, but wasn’t exactly sure how to go about it, so he called us since he knew we specialized in LS builds,” Chauffe says. “He had a goal of at least 1,100 hp, but definitely wanted to keep the look of a big, positive displacement blower. I recommended to him that we use the Dart SHP LS 427 block and let Don Hardy Race Engines build the short block/machine work. We also recommended that it be machined for 1/2˝ head studs as well.”
The Dart SHP block features a 4.125˝ bore, splayed mains and a 9.239˝ deck height. Aside from 1/2˝ ARP head studs, C&G also used ARP main bolts and rod bolts for the build. The rotating assembly is a 4340 4.0˝ stroke crankshaft, H-beam connecting rods and Diamond Race Series 2K -21cc LS pistons with Total Seal stainless rings with .026˝/.030˝ ring gaps.
The valvetrain of the LS build features a Cam Motion custom spec 236/250 duration and .620/.604 lift, 14.5+4 LSA camshaft. The cylinder heads are RHS 6-bolt LS3 heads with Don Hardy custom CNC port work. They are sealed with custom 4.200˝ bore, .052˝ compressed head gaskets.
Other valvetrain parts include Lunati Tie Bar lifters, Brian Tooley Racing pushrods, COMP Cam’s 1.7 rocker arms with trunnion upgrade, and .660 PAC dual valve springs with titanium retainers. C&G also included Clevite coated bearings, a Melling oil pump, a JP Performance billet gear timing set with thrust bearing, a GM LS2 chain damper, an ATI balancer, and a CVF front accessory drive that the shop custom machined billet spacers for.
“We wanted to add some wow factor to the engine, so we used a Holley Hi-Ram lower manifold to give it some height,” Chauffe says. “I then added a burst panel kit to the front of it. This engine will be street driven 100% of the time, so I recommended we add a cooling system to keep the IATs in check, especially on such a large displacement blower, so we added a 417 Motorsports 1,500 hp air-to-water cooled heat exchanger under the supercharger. It will have -16AN hoses circulating through the heat exchanger mounted behind the grille and a 5-gallon tank in the trunk.
“We then took it to the next level and added a Snow Performance water/meth injection kit in between the supercharger and heat exchanger for added cooling when under boost and for added octane, so we can make more boost than just 93 pump gas would allow. Everything was custom painted, ARP polished bolts used everywhere, Holley LS swap oil pan, Motion Raceworks 4 corner steam vent kit, ICT billet valley cover, NGK spark plugs, and it will be controlled by a Holley Dominator EFI system.”
The Whipple 510AX 8.3L blower is fitted with 10 1,000cc injectors from Fuel Injector Clinic, and the engine has Holley mid-length headers, which C&G had to use due to the ’66 Chevelle being extremely low. The headers were also coated with Jet Hot’s 2500 coating.
Some final details of the build include twin 500lph fuel fumps, a built 4l80e transmission with billet triple disk converter, a JW Performance SFI flex plate, and the ‘66 Chevelle is back-halved and runs 33x22x20 Mickey Thompson Pro Street Radial tires in the rear.
“The engine will make 18-20 psi of boost,” he says. “It has a 9.5:1 compression, is methanol injected and runs on 93 octane. Conservatively, the 427 LS will make 1,300+ horsepower. It should be spicy!”
Engine of the Week is sponsored by PennGrade Motor Oil, Elring – Das Original and Scat Crankshafts. If you have an engine you’d like to highlight in this series, please email Engine Builder Editor, Greg Jones at [email protected].
This one-of-one Panozster we saw at the Cleveland Auto-Aviation Museum features a number of unique traits that make it a truly special roadster, including its 427 cubic inch Ford Windsor V8 engine! Check it out.
There’s an abundance of very cool cars out there in the world, but despite all those cool cars available, some folks would rather build a car that’s entirely their own, and therefore, a one-of-one example. That’s what we were treated to when we recently visited the Crawford Auto-Aviation Museum in Cleveland, OH – a one-of-a-kind, 1948 Panoz Roadster featuring a 427 cubic inch Ford Windsor V8 engine. We got the full rundown of this build, which took 13 years to complete, from the Crawford Museum’s Program and Marketing Manager, John Lutsch.
BB&T Racing in South Haven, MS has been building high-performance domestic engines for 30 years. One of their latest builds is for a drag racing customer looking to go faster utilizing an F3 ProCharger. Check out this 2,600 hp ProCharged 540 big block Chevy engine!
It’s no secret that turbochargers dominate the power adders seen in drag-and-drive events, and to a lesser degree, superchargers. However, very few competitors resort to nitrous. Graham Hayes is one of those nitrous believers, and his Buck Racing Engines-built 615 cid big block Chevy engine put on a strong performance all five days of Sick Week 2023. Check it out.
Kevin Willms has owned this 1930 Ford Roadster since the age of 17. He’s now 62 and getting into the drag-and-drive scene with the roadster and its 468 cid big block Chevy engine. Check it out!
Tony Niemczyk has owned his 1995 Mitsubishi Eclipse since 2001. Over the years, it’s been a constant evolution to get the car from a regular commuter to the point it is today – a streetable race machine with the claim of Sick Week’s Fastest 4-Cylinder and back-to-back Sick Week Freaks class wins. That’s thanks to a turbocharged 2.0L 4G63 engine. Check out the details!
Precision CNC-machined from premium 4340 steel billets, the design incorporates heavy-duty rod cheeks and the LS1/LS6 short snout.
We love every opportunity we get to speak with Pat Musi of Pat Musi Racing Engines. This time, we were down in Mooresville, NC to check out his shop in person and get the details of a few engine builds he had underway. This is an Outlaw 4.84 nitrous engine with 731 cubic inches of
Sandy Wilkins of Wilkins Racing Engines recently allowed us to visit his engine and machine shop in Mooresville, NC. We were thoroughly impressed by how clean and organized his shop was and the caliber of the engines his shop churns out. We got the full details of this big block Chevy nitrous engine he built
We all know Pete Harrell of Harrell Engine & Dyno in Mooresville, NC is real good at doin’ stuff, like building high-horsepower, forced induction engines. Earlier this summer, we stopped by HED for a tour and to talk to Pete about some of the current builds he had going on. One of the engines nearing
High Performance Street Engines Content for engine professionals and enthusiasts